The best glove we've ever offered!

Unbelievable fit... you'll be amazed!

Kangaroo Back, Digiroo™, with CROSSTECH® Moisture Barrier

• Top Grain Kangaroo back outer shell stands up to abrasion, and is strong enough for any fire fighting task. Densely packed fibers minimize water absorption, and the leather does not become slippery when wet
   
• Black Digiroo™ kangaroo palm grips and fingers extend the advantages of kangaroo leather to provide incredible durability, grip, and tactility with unprecedented thinness.
   
• CROSSTECH® moisture barrier provides high breathability, high heat resistance, high temperature stability, high abrasion resistance, continuous moisture barrier protection, and fast glove drying.
   
• Air Spacer™ thermal lining traps air for thermal protection without traditional bulk.
   
• 3-D patterning with Swing Thumb™. True 3-D Hand Shaped Styling with Staggered Layer Seaming makes hand movement less opposed and less stressful
   
• Bubble-Flex and Flex-Tuck construction with dead air spacer ridges allow natural hand flexing and increases effective insulation. Since the glove is not normally pulled tight to the skin... an insulating "blanket" of air is always retained.
   
• NFPA 1971  compliant - wristlet Super Glove is Quad Certified to NFPA 1971, 1951 Recovery, 1951 Utility, 1999
   
• Guaranteed against liner detachment
   
• Available in sizes XS thru XXL - Also available in cadet size (½" shorter fingers)
   
• Note: Due to the 3D construction of the Super Glove, most people are ordering one size smaller than traditional glove sizes.

In Stock

• Specially-treated Thermo leather cowhide shell for long lasting softness
• Polyurethane moisture barrier
• SEF Modacrylic thermal lining
• Leather Gauntlet cuff
• Wing thumb design for better grip and dexterity
• NFPA 1971 and OSHA compliant if worn with turnout coats that have an over-the-thumb wristlet
• Guaranteed against liner detachment
• Available in sizes XS thru XXL
  
  

In Stock

• Specially-treated Thermo leather cowhide shell for long lasting softness
• Polyurethane moisture barrier
• SEF Modacrylic thermal lining
• NOMEX® knitwrist
• Extra wide pull tabs for greater wrist protection
• Wing thumb design for better grip and dexterity
• NFPA 1971 and OSHA compliant
• Guaranteed against liner detachment
• Available in sizes XS thru XXL
  
  

Kangaroo leather dries in about 20 minutes.

Durable KANGAROO Leather Palm coupled with soft Elkskin back for the most comfortable structural fire glove in the industry!  CROSSTECH® Barrier model is compliant to both NFPA standards:

NFPA 1971 Structural and NFPA 1951 USAR.

• Kangaroo Palm/Elkskin Back
• Kangaroo leather with Eversoft tanning repels water and remains soft after repeated use
• Kangaroo leather is extremely durable for long life and better slash resistance
• 35% Kevlar Thermal Lining offers superior slash resistance
• CROSSTECH™ Moisture Barrier
• 2-ply NOMEX®/Spandex® knitwrist with leather pull tab. Tab is 3-1/2" wide at base for additional wrist protection.
• Leather seam welt between thumb and index finger
• Elastic snugger band on back
• New Swing thumb design for improved grip and reduced hand fatigue
• NFPA 1971 and NFPA 1951 compliant
• Guaranteed against liner detachment
• Available in sizes XS thru XXL
  
  

Kangaroo leather dries in about 20 minutes.

Durable KANGAROO Leather Palm coupled with soft Elkskin back for the most comfortable structural fire glove in the industry!  CROSSTECH® Barrier model is compliant to both NFPA standards:

NFPA 1971 Structural and NFPA 1951 USAR.

• Kangaroo Palm/Elkskin Back
• Kangaroo leather with Eversoft tanning repels water and remains soft after repeated use
• Kangaroo leather is extremely durable for long life and better slash resistance
• 35% Kevlar Thermal Lining offers superior slash resistance
• CROSSTECH™ Moisture Barrier
• Leather Gauntlet cuff
• Leather seam welt between thumb and index finger
• Elastic snugger band on back
• New Swing thumb design for improved grip and reduced hand fatigue
• NFPA 1971 and NFPA 1951 compliant if worn with turnout coats that have an over-the-thumb wristlet
• Guaranteed against liner detachment
• Available in sizes XS thru XXL
  
  

Sizes shown are in stock

• Double chrome-tanned cowhide shell
• SEF Modacrylic thermal lining
• NOMEX knitwrist
• Extra wide pull tabs for greater wrist protection
• Wing thumb design for better grip and dexterity
• Guaranteed against liner detachment
• Only available in sizes shown
  
  

*Limited quantities and sizes available

• Polyurethane moisture barrier
• Highly flexible glove back and index finger constructed of gold elk skin fights hand fatigue and adds superior dexterity
• Glove palm and remaining palm side fingers constructed of double chrome-tanned cowhide for increased palm durability
• SEF Modacrylic thermal lining and moisture barrier securely stitched at finger tips
• Unique utility cuff of NOMEX® knitwrist allows rapid donning of wet gloves and can be worn as a knitwrist or gauntlet
• Leather retaining band wraps around a full 360 degrees to help prevent tearing
• Reinforcement strip increases dexterity and wraps around glove to protect first knuckle
• New Swing thumb design for improved grip and reduced hand fatigue
• NFPA 1971 and OSHA compliant
• Guaranteed against liner detachment
• Available in sizes XS thru XXL
  
  

In Stock

 GR-9 Fire-End Extrication/Responder Glove

• Golden-Yellow Cordura Nylon glove back

• Top-grain Black Goat Skin leather palm for maximum dexterity

• Black padded knuckle protector on back of glove

• Mini 2" black knitwrist with leather pull tab keeps debris out

• Kevlar grip-enhancing protective pads in slash / puncture prone areas

• Daylight visibility from bright yellow glove back. Night visibility from Scotchlite^TM reflective trim

• Full Fleece-lined glove back provides cushioning comfort

• Fully washable

• Available in five sizes to accommodate most everyone: M, L, XL, XXL and XXXL
  
  

Our Glove Straps are designed to attach to the Dee ring of your turnout coat. 
The Glove Strap is made of black FR Velcro® with a heavy duty snap hook.

This is an ideal method for air drying your gloves
 

In Stock