FIRE SERVICES PRODUCTS
Firehooks New York Specialty Hooks
FIRE SERVICES PRODUCTS
Firehooks New York Specialty Hooks
|
|
|
|||
|
|
Dry Wall Hook-
Solid Fiberglass Pole Steel welded head with stainless steel wear sleeve, solid 1" fiberglass shaft, Celtex grips, safety sealed shaft ... the top of the line dry-wall hook. Gas shut-off directional slot ram knob on non D handle models |
||
| Model Number | Length | ||
| DWHS-4' | 4' | $77.00 | |
| DWHS-6' | 6' | $85.00 | |
| DWHS-8' | 8' | $102.00 | |
| DWHS-32"W/D | 32" with "D" handle | $77.00 | |
| DWHS-40"W/D | 40" with "D" handle | $77.00 | |
|
|
All-Purpose
Hook- Solid Fiberglass Handle The specified all purpose hook of the New York City Fire Department. Solid fiberglass, stainless steel wear sleeves, Celtex grips, and Gas shut-off directional slot ram knob. |
||
| Model Number | Length | ||
| APH-4' | 4' | $64.00 | |
| APH-6' | 6' | $73.00 | |
| APH-8' | 8' | $85.00 | |
|
|
New York Roof Hook- Steel Shaft Developed by the New York City Fire Department's research and development department. Features an all purpose head, aircraft steel shaft, chisel end, and Celtex grips. The chisel end is used as a prying tool for scuttle hatches and roof doors. The short lengths are for going up fire escapes and scuttles to the roof. |
||
| Model Number | Length | ||
| RH-3' | 3' | $73.00 | |
| RH-4' | 4' | $81.00 | |
| RH-5' | 5' | $90.00 | |
| RH-6' | 6' | $98.00 | |
| RH-8' | 8' | $107.00 | |
|
|
Eckert Hook- Fiberglass Shaft The pride of the mid-town trucks. Used to open up tin ducts, air conditioning systems and complex metal hoods found in restaurants. Its sharpened edge serves to penetrate tin on the push stroke while the six sharpened teeth on the underside complete the cut on the pull stroke. Can be used conventionally in the removal of lathe and plaster. Stainless steel wear sleeves and Celtex grips compliment this unit. |
||
| Model Number | Length | ||
| EK-4' | 4' | $68.00 | |
| EK-6' | 6' | $77.00 | |
| EK-8' | 8' | $85.00 | |
| EK-32"W/D | 32" with "D" handle | $77.00 | |
| EK-40"W/D | 40" with "D" handle | $77.00 | |
|
|
Outside Vent
Hook Vents out of reach windows from the roof position, over parapet walls or the roof ledge. Vents out of reach windows off fire escapes or ladders. Also vents out of reach windows from alley-ways or yards from the ground level. Features a positive guide sliding channel with lock stop, Sure lock clevis pin with cable attached to the guide nut, and Ball spring release without groping for holes. The fiberglass rod slides into the stainless steel tubing.
|
||
| Model Number | Length | ||
| OVD-4'/6'6" | 4' to 8'6" | $90.00 | |
| OVD-6'/8'6" | 6' to 8'6" | $102.00 | |
| OVD-4'/6'6"W/D | 4' to 6'6" with "D" handle | $102.00 | |
| OVD-6'/8'6"W/D | 6' to 8'6" with "D" handle | $111.00 | |
 |
 |
All pricing subject to change without notice.
Fire-End & Croker Corporation
7 Westchester Plaza
Elmsford, New York 10523-1678 USA
Phone: 1-914-592-3640
1-800-759-3473 (USA only)
Fax: 1-914-592-3892
