FIRE SERVICES PRODUCTS
|
|
Firehooks Specialty Hooks
|
|
|
||
|
|
Arson Trash Hook The Arson-Trash Hook was developed to find hidden fire in deep seated smoldering fires normally found in dumpsters. A normal hook just won't pull trash in large quantities. This hook, because of its two large six inch pointed prongs, will grasp debris in large chunks. The Arson-Trash Hook incorporates stainless steel wear sleeves welded to steel supported prongs, attached to a solid fiberglass pole with Celtex grips, and an alloy "D" handle The normal trash hook is recommended at 6' length. For use in close quarters we suggest the 40" length model, which is small enough to fit in the trunk of most cars. |
||
| Model Number | Length | ||
| TRH-32"W/D | 32" with D handle | $77.00 | |
| TRH-40"W/D | 40" with D handle | $77.00 | |
| TRH-4'W/D | 4' with D handle | $81.00 | |
| TRH-6'W/D | 6' with D handle | $90.00 | |
| TRH-8'W/D | 8' with D handle | $98.00 | |
|
|
Gator-Back Hook The Gator-Back is an innovative pike pole introduced in 1994. It has a regular tapered pike pole head. On its back, is ten sharpened cross cutting teeth that can cut on the pull stroke as well as the push stroke. The Gator-Back will cut lath, plaster and sheetrock faster than any tool on the market today. Used with a "D" handle, the gator-Back can easily saw through ice in a pond, lake or river. |
||
| Model Number | Length | ||
| GBH-4' | 4' | $85.00 | |
| GBH-6' | 6' | $94.00 | |
| GBH-8' | 8' | $102.00 | |
| GBH-32"W/D | 32" with D handle | $90.00 | |
| GBH-40''W/D | 40'' with D handle | $102.00 | |
|
|
Chimney Hook
824 Designed to break creosote buildup after the fire is put out. The Chimney Hook 824 is a 3 section fiberglass extension pole with a unique ram head. It extends from 8' to 24' and is designed to fit most straight chimneys. To use, lower the top 8' section to the blockage, turn the posi-lock pole ¼ turn clockwise. If the blockage is not felt, lower the second 8' section and repeat above steps until the blockage is felt. The pole must be locked before pushing through the blockage. |
||
| Model Number | Length | ||
| CH824 | 8' to 24' | $128.00 | |
|
|
Griff Hook The Griff Hook is a unique tool for Officers, Nozzlemen and Roofmen. It is 36" long and has a chisel end for prying The Griff Hook features a heavy duty carrying sling which attaches to the two welded rings on the top and bottom of the tool. |
||
| Model Number | Length | ||
| GH36 | 36" | $81.00 | |
|
|
|
All pricing subject to change without notice.
Fire-End & Croker Corporation
7 Westchester Plaza
Elmsford, New York 10523-1678 USA
Phone: 1-914-592-3640
1-800-759-3473 (USA only)
Fax: 1-914-592-3892