AI-1201 CARBON MONOXIDE AND METHANE MONITOR WITH LED VISUAL AND AUDIO ALARMS
The AI-1201 monitor will accurately measure and display CO and LEL (flammable gas)
✔ Visual and Audio Alarms at Methane levels of 5000 ppm.
✔ Visual and Audio Alarms at CO levels of 30 ppm, 60 ppm, and 120 ppm.
✔ There is no routine bump testing or calibration required.
✔ The monitor is warranted for five years
✔ Even the sensor and its calibration is included in the warranty
Weight: .8 lbs.
Dimensions: 7 x 5 x 3 in
Built on the same technology and with all the features of the 1200 monitor and now incorporates the energy efficiency, motion switch technology, enhanced alarm and backlit LCD screen built into all of our V2 models. In addition to all that, it adds LEL (flammable gas) capability that is calibrated to methane. The calibration to methane was chosen because it can be a “silent” gas you can’t see or smell in its pure form. You can count on the Airspace monitor to give you an accurate reading for methane gases you might otherwise not know are there. Like other LEL sensors, it will also “see” most of the other hydrocarbon gases – such as gasoline, propane, natural gas, hydrogen, acetylene, etc. It won’t give an accurate ppm reading for those other gases because the calibration is to methane, but it will be very useful since any ppm reading for those other gases will be an indication of an ambient air saturation – therefore a flame or explosive hazard – is occurring. In that environment it will then allow you to “see” the trend as you take steps to manage the hazard. No ppm reading, even though you can smell or see a gas present, is an indication the gases are dissipating and an explosion is therefore less likely – also very valuable information to have on an emergency turn out
CC-01 Storage Case
VC-01 Verification Test Gas
Airspace Monitors do not require any calibration or routine bump testing. Best practices dictate that you should still test your monitor on a periodic basis. The VC-01 Verification Test Gas is a compact 2 Liter can that can provide a quick verification any time it is needed. All you need to do is hold the nozzle to the sensor inlet and depress trigger for 2 seconds to verify monitor response.
Airspace Carbon Monoxide and Methane Monitor with LED Display and Audible Alarms
- Brand: Airspace Monitoring Systems
- Model: AI-1201
- 4 or more $480.96
Delivery/Shipping Availability: Item ships directly from manufacturer. Approximate delivery in 2-3 weeks.